iQOO released two flagship phones, iQOO 10 / Pro. The iQOO 10 series debuted with 200W ultra-fast flash charging, which can be charged to 100% in as fast as 10 minutes. At the same time, the iQOO 10 series is equipped with Qualcomm’s first-generation Snapdragon 8+ chip and self-developed chip V1. Today, a revealer brought the specification information of the iQOO iterative flagship, the new iQOO 11 series.
JOIN XIAOMI ON TELEGRAM
The revealer @Digital Chat Station revealed today that the iQOO 11 series will be powered by the Qualcomm Snapdragon 8 Gen 2 processor with radical performance. At the same time, the new iQOO 11 series will also be provided with an outsole main camera and a large battery of 100 watts. The revealer said that “this upgrade is still relatively large.” As for the battery capacity, the revealer said that it did not reach 5500mAh, and generally only sub-flagship phones will have a built-in 5500mAh battery.
In terms of screen, the revealer previously stated that the new iQOO 11 series will use a single-hole flexible screen with 2K resolution and 120Hz refresh rate. The screen uses PWM dimming and Samsung E6 substrate. Today, the revealer said that the iQOO 11 series screens “look and feel OK”. At the same time, the revealer emphasized that “only one type of screen is seen”, so some users speculated that the iQOO 11 standard version and the iQOO 11 Pro will use the same screen.
Moreover, the iQOO 10 standard version uses a 6.78-inch Samsung E5 flexible straight screen and supports a 120Hz refresh rate. The iQOO 10 Pro uses a 2K resolution Samsung E5 screen, supports LTPO, and is equipped with an ultrasonic 3D wide-area fingerprint recognition function. At the same time, the entire iQOO 10 series supports HDR10+ and DC dimming, with a local maximum brightness of 1500nits and a contrast ratio of 8 million:1.
